This page contains Amazon affiliate links. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.
Choosing the right flat pedal can improve grip and control on technical trails. Our flat pedal guide covers the basics, and if you’re deciding between systems, see clipless vs flat pedals.
We looked at seven flat pedals for mountain bikes, comparing platform dimensions, pin count, weight, and bearing type. All use a standard 9/16-inch spindle and fit most mountain bike cranks.
Every specification on this page comes from each product’s Amazon listing (item data from Amazon’s Creators API), checked on 29 October 2026. We have not used these products ourselves, so the picks are based on published specifications only.
For more on matching shoes to pedals, read our mountain bike shoes guide.
How we chose these
- Platform size and shape A larger platform supports the foot better and a convex or thin profile can reduce pedal strikes.
- Pin count and grip More pins and replaceable steel pins provide secure traction on rough terrain.
- Weight and material The pedals here use aluminum alloy or nylon composite bodies; listed weights run from 302 g to 0.9 lbs per pair.
- Bearing quality Sealed bearings protect against dirt and water, and multiple bearings can improve smoothness and longevity.
Weights and dimensions are as stated in each product’s Amazon listing.
Comparison table
| Product | Weight | Platform size | Material | Pins | Bearings |
|---|---|---|---|---|---|
| ROCKBROS Aluminum | 0.66 lbs (302g) | 101mm wide (length not stated) | Aluminum alloy | Not stated (stainless steel spikes) | Sealed bearing (number not stated) |
| GEWAGE 3-Bearing | 332g (0.66 lbs) | 100 x 104mm | Aluminum alloy composite | 8 per side (16 per pedal) | 3 sealed bearings |
| Hapleby Flat | 0.9 lbs | 3.74 x 3.94 in | Aluminum alloy | 6 per side | 2 sealed bearings |
| FIFTY-FIFTY Nylon | 351g per pair | 106 x 104mm | Nylon composite | 9 per side | Sealed bearing (number not stated) |
| YBLNTEK Aluminum | Not stated | Not stated | Aluminum alloy | 12 (not specified per side) | Dual DU bearings |
| OneUp Composite | 355g | 115 x 105mm | Nylon composite | 10 per side | Not stated |
| JETCAT Nylon | 0.75 lbs | 4.29 x 3.92 in | Nylon | 8 (not specified per side) | 3 sealed bearings |
Pin counts are per side unless the listing gives only a total. ‘Not stated’ means the listing does not give that detail.
Pros
- Wide platform
- Lightweight
- Lifetime warranty
Cons
- Pin count not specified
- Bearing count not stated
Pros
- Known pin count
- Three sealed bearings
- Replaceable pins
Cons
- Slightly heavier than some nylon pedals
- Platform not the largest
Pros
- Includes wrench
- Sealed bearings
Cons
- Heavier at 0.9 lbs
- Fewer pins (6 per side)
- Smaller platform
Pros
- Large platform
- Thin profile
- Replaceable pins
Cons
- Bearing count not stated
- 351 g per pair
Pros
- Dual DU bearings
- Aluminum build
- 12 pins
Cons
- Weight and platform dimensions not stated
- Pin arrangement unclear
Pros
- Very large platform
- Lightweight
- Convex shape
- 10 pins per side
Cons
- Bearing type not stated
- Nylon material
Pros
- Lightweight
- Three sealed bearings
- Includes hex key
Cons
- Pin count per side not specified
- Nylon body
1. ROCKBROS Aluminum MTB Pedals: for riders wanting a wide aluminum platform with sealed bearings
ROCKBROS says these pedals have a wide 101mm platform and a lightweight aluminum alloy body. The chromoly steel spindle and sealed bearing are designed to keep out water and dust. Stainless steel anti-skid spikes on each side provide grip. The brand offers a lifetime warranty.
- CNC integration aluminum alloy construction (ROCKBROS)
- Carbon fiber bushing outside the spindle for durability (ROCKBROS)
- Gasket design to prevent water and dust entry (ROCKBROS)
Pros: Wide platform; lightweight; lifetime warranty
Cons: Pin count not specified; bearing count not stated
2. GEWAGE 3-Bearing Flat Pedals: for riders who want a known pin count and three sealed bearings
GEWAGE states the pedals weigh 332 grams and have a 100 x 104mm platform with a 14mm profile. They include 16 replaceable pins total, 8 per side, for solid grip. The three sealed bearings are meant to protect the spindle from water and dust. The chromoly steel spindle is said to be stronger than ordinary steel.
- Sloped leading edges to reduce pedal strikes (GEWAGE)
- Installation with an 8mm Allen key (GEWAGE)
Pros: Known pin count; three sealed bearings; replaceable pins
Cons: Slightly heavier than some nylon pedals; platform not the largest
3. Hapleby Flat Pedals: for riders who want a pedal with a wrench included
Hapleby says these pedals use an aluminum alloy body and a high-strength Cr-Mo spindle. Each side has 6 pins for grip, and the pedals come with a pedal wrench. Two sealed bearings per pedal are intended to keep the spin smooth. The brand claims the rubber ring helps keep the bearing clean.
- Includes 1 PC pedal wrench (Hapleby)
- Rubber ring for dust protection (Hapleby)
Pros: Includes wrench; sealed bearings
Cons: Heavier at 0.9 lbs; fewer pins (6 per side); smaller platform
4. FIFTY-FIFTY Mountain Bike Pedals: for riders wanting a thin, large nylon platform with replaceable pins
FIFTY-FIFTY says these pedals have a nylon composite body and a Cr-Mo spindle. The platform measures 106 x 104mm and is only 0.7 inch thick to reduce pedal strikes. Nine replaceable steel pins per side provide grip. The sealed bearing design is meant to protect against water and dust.
- Ultra-thin 0.7 inch thickness for clearance (FIFTY-FIFTY)
- Shock-proof, abrasion and corrosion resistant (FIFTY-FIFTY)
Pros: Large platform; thin profile; replaceable pins
Cons: Bearing count not stated; 351 g per pair
5. YBLNTEK Dual DU Bearing Pedals: for riders who prioritize a dual DU bearing system and aluminum build
YBLNTEK says these pedals use dual DU bearings and a chromoly steel axle for smooth, quiet spinning. The aluminum alloy body is made with one-piece casting for impact resistance. Twelve non-slip pins are included for grip, though the brand does not specify the per-side count. The pedals fit standard 9/16-inch cranks.
- One-piece casting technology (YBLNTEK)
- Sealed design keeps out dust and water (YBLNTEK)
Pros: Dual DU bearings; aluminum build; 12 pins
Cons: Weight and platform dimensions not stated; pin arrangement unclear
6. OneUp Components Composite Pedals: for riders wanting a proven, lightweight composite pedal with a large platform
OneUp Components says these pedals weigh 355g and have a large 115 x 105mm platform. The nylon composite body has a subtly convex shape to sit in the arch of the foot and reduce pedal strikes. Ten hexagonal pins per side are pre-installed. The pedal height ranges from 13.3mm to 18.5mm.
- Convex profile for natural foot arch fit (OneUp)
- Pedal height 13.3mm to 18.5mm (OneUp)
- Serviceable at home without proprietary tools (OneUp)
Pros: Very large platform; lightweight; convex shape; 10 pins per side
Cons: Bearing type not stated; nylon material
7. JETCAT Mountain Bike Pedals: for casual riders wanting a lightweight nylon pedal with sealed bearings
JETCAT says these pedals are made of nylon and have 8 anti-skid nails for grip. Three sealed bearings are included to keep dirt and moisture out. The pedals weigh 0.75 pounds and measure 4.29 by 3.92 inches. They come with a hex key for installation.
- Includes hex key (JETCAT)
- Standard 9/16-inch spindle (JETCAT)
Pros: Lightweight; three sealed bearings; includes hex key
Cons: Pin count per side not specified; nylon body
Which one fits you
| Your situation | Look at | Why |
|---|---|---|
| You want the largest platform and most pins | OneUp Components Composite or FIFTY-FIFTY Nylon | OneUp lists 115 x 105 mm with 10 pins per side; FIFTY-FIFTY lists 106 x 104 mm with 9 per side. |
| You prefer a durable aluminum pedal with known bearing count | GEWAGE 3-Bearing or Hapleby Flat | Aluminum bodies with 2-3 sealed bearings and replaceable pins. |
| You need a lightweight pedal for all-mountain riding | ROCKBROS Aluminum or JETCAT Nylon | Both are lightweight: ROCKBROS at 302g and JETCAT at 0.75 lbs. |
| You want a pedal with included tools | Hapleby Flat | Comes with a pedal wrench and has sealed bearings. |
Practical tips
- Look for pedals with replaceable steel pins; worn pins can be swapped out to maintain grip.
- Compare platform sizes: they run from 3.74 x 3.94 inches (Hapleby) to 115 x 105 mm (OneUp) here.
- Most of these list sealed bearings; GEWAGE and JETCAT list three per pedal, Hapleby two, and YBLNTEK dual DU bearings.
- Check the pedal thickness: thinner pedals reduce the chance of pedal strikes on rocky terrain.
FAQ
How many pins do I need on a flat mountain bike pedal?
The pedals here list between 6 pins per side (Hapleby) and 10 per side (OneUp). Several brands say their pins are replaceable, so worn pins can be swapped.
Are nylon composite pedals strong enough for aggressive trail riding?
OneUp Components and FIFTY-FIFTY use nylon composite bodies, and FIFTY-FIFTY calls its pedals shock-proof and abrasion resistant. The listings do not give stiffness figures, so compare platform size and pins instead.
What does a sealed bearing do?
Sealed bearings keep dirt, water, and dust out of the pedal internals, which helps the pedals spin smoothly and last longer. Multiple sealed bearings, like three in the GEWAGE pedals, can further improve durability.
Do all these pedals fit my mountain bike?
The listings here use a 9/16-inch spindle thread. Check your crank arm specification before buying.
Sources
Specifications from each product’s Amazon listing, checked 29 October 2026: ROCKBROS Aluminum MTB Pedals, GEWAGE 3-Bearing Flat Pedals, Hapleby Flat Pedals, FIFTY-FIFTY Mountain Bike Pedals, YBLNTEK Dual DU Bearing Pedals, OneUp Components Composite Pedals, JETCAT Mountain Bike Pedals. Makers can change specifications; check the product page before you buy.
