Updated November 2026
Turning off a Bontrager bike computer usually takes one long press of a button, but the exact steps depend on your model and whether you are mid-ride or finished. This guide explains how to power down a Bontrager unit safely, how to make sure your ride has saved before you do, and how to confirm the device is fully off so the battery lasts until your next session. If you are still looking for the manual, Bontrager 100 Bike Computer: Setup Steps, Features and Buying Tips covers the basic layout of that model.
Before You Power Down
Stopping the computer while a ride is still recording can leave an incomplete file or lose the last few minutes of data. Finish your ride first, then confirm the activity has been saved. Most Bontrager units show a summary screen or a “ride saved” message when you stop recording. If you skip this step, you may find gaps in your ride history, especially on units that save only when the recording is stopped manually.
Shopping for one? See our guide: 6 Best Bontrager GoTime Bike Computer Options Compared (2026).
It is also worth checking the battery level. A low charge can cause the unit to shut down unexpectedly, which may corrupt the current file. Charge the device before a long ride so you are not forced to power it off in an unusual way.
How to Turn Off a Bontrager Bike Computer
The general method works across most Bontrager computers. Start by stopping the ride, then power the unit down with the main button.
- Stop the ride recording. Press the start/stop button or select the stop option on the screen.
- Wait for the save confirmation. Let the summary or saved message appear before continuing.
- Press and hold the power or main button until the screen shows a shutdown prompt or goes dark. Hold it for several seconds, not just a quick tap.
- If a menu appears, select “Power Off” or “Shut Down” and confirm.
- Check that the display is blank and no status lights are blinking.
Confirming the Unit Is Fully Off
A dark screen does not always mean the device is off. Some units enter a sleep mode that still draws a small amount of power. To confirm, wait ten seconds, then press the button once. If the unit does not wake, it is off. If it wakes to the home screen, repeat the long press and look for the shutdown prompt again.
Turning Off Mid-Ride or When the Unit Freezes
If the computer stops responding during a ride, avoid pulling the battery or forcing a reset unless you have no other option. Try a long press first, which often triggers a hard restart. Once the unit reboots, check whether the ride file was kept. If the device is frozen and the ride is lost, the cause is often a software glitch, and checking for updates through the companion app is the next step. Keep in mind that power-related problems can also affect sensors, so review the setup if issues repeat.
Sleep Mode vs. Powering Off
Many riders leave their computer in sleep mode between rides because it wakes quickly. Sleep mode saves some battery, but a full power-off saves more and avoids unwanted button presses in a bag. For storage longer than a few days, always power the unit fully off and keep it charged to a moderate level. Manufacturers generally advise against storing lithium batteries fully drained or fully charged for long periods, so check your model’s manual for the recommended storage charge.
Recommended Gear
A compact USB charging cable that matches your unit’s port keeps the battery topped up between rides, which helps avoid unexpected shutdowns. View on Amazon
A protective silicone sleeve can prevent accidental button presses in your jersey pocket or bag, which is a common reason a unit is left running. View on Amazon
Common Mistakes
- Powering off before the ride is saved, which can lose recent data.
- Assuming a blank screen means the unit is off, when it may still be in sleep mode.
- Removing the battery or forcing a reset as a first step instead of a normal shutdown.
- Storing the computer with a very low charge for weeks at a time.
- Ignoring a repeated freeze, which can point to a software or sensor issue.
FAQ
Do I need to stop a ride before turning off my Bontrager computer?
Yes, it is best to stop and save the ride first. Powering off mid-recording can leave the file incomplete or cause data loss.
Why does my Bontrager computer turn back on by itself?
Some units wake when they detect a sensor signal or a button is pressed in a pocket or bag. Using a protective case and checking your sleep settings usually stops this.
Will turning off the computer erase my ride data?
No, a normal shutdown does not delete saved rides. Data stored on the unit remains available after powering it back on.
Conclusion
To turn off a Bontrager bike computer, stop and save your ride, then hold the power button until the shutdown prompt appears. Confirm the screen stays dark after a short wait. Following this routine protects your ride data and helps the battery last between sessions.
Related reading
- West Bike Computer Manual: Where to Find and How to Use Yours
- Wahoo Fitness Bike Computer: How to Choose and Set Up Yours (2026)
- Trek Bike Computer Manual: How to Find, Read and Set Up Yours
- Sunding Bike Computer Manual: Where to Find It and How to Set It Up
- Sigma Bike Computer Manual: Where to Find It and How to Use It

Write Your Review
No reviews yet. Be the first to share your experience!