Updated November 2026
Changing lenses on DHB cycling glasses is a straightforward job once you know how the frame releases the lens. This guide walks through the process step by step, covers the tools and care that prevent scratches or a loose fit, and explains how to confirm the new lens sits correctly before you ride.
Before You Start
Work on a clean, padded surface such as a folded towel. Lenses are easy to scratch, and a dropped lens on a hard floor can chip. Check the manufacturer’s manual or the product page for your specific model, since clip and screw arrangements vary between frame designs.
Shopping for one? See our guide: 6 Best Photochromic Cycling Glasses: Picks for Changing Light (2026).
How to Remove the Current Lens
Most sport frames hold lenses with a combination of a rubber gasket, pressure from the frame arms, and small tabs or clips. Start by removing the temple arms if your model uses screw-in hinges, then gently ease the lens out from the top edge while keeping your fingers on the lens edges rather than the coating.
- Lay the frame on a soft cloth with the lens facing up.
- Press the frame at the hinge area to slightly open the lens channel.
- Lift the lens out from one corner, working around the rim rather than pulling at one spot.
- Store the removed lens in a hard case or its original pouch immediately.
How to Fit the New Lens
Insert the new lens with the coated side facing the correct direction, which is usually marked by a small logo or the lens shape. Seat the top edge first, then press the bottom edge into the channel. Keep pressure even so the lens does not bow, and check that the rubber gasket is not twisted or pinched.
Checking the Seating
Once the lens is in, look at the frame from the front and from the side. The lens should sit flush in the rim with no gaps and no bulging. Gently tap the frame on the soft cloth to see whether the lens rattles. A loose lens will move or shift during a ride, so reseat it if you hear any movement.
Choosing Lenses for Changing Conditions
Match the lens to the conditions you ride in most. Clear or very light tints suit low light and night riding, medium tints work for variable sun, and darker lenses handle bright, open roads. Photochromic and transition options adjust with light, but they respond more slowly than a fixed tint, so they are not a substitute for a change when conditions shift quickly.
| Riding condition | Lens type to consider |
|---|---|
| Dawn, dusk, overcast | Clear or light tint |
| Variable sun and shade | Medium tint or photochromic |
| Bright, open sun | Dark tint |
For a broader look at light-adaptive options, see Cycling Glasses Photochromic Lenses: How to Choose and Use Them in 2026 and Cycling Glasses Transition Lenses: How to Choose the Right Pair in 7 Steps.
Common Mistakes
- Pulling the lens by its edge with fingernails, which can tear the gasket.
- Inserting the lens upside down or in the wrong orientation.
- Skipping the seating check, leaving a lens that shifts on rough roads.
- Storing removed lenses loose in a jersey pocket where grit can scratch them.
- Cleaning with a dry shirt or paper towel instead of a microfiber cloth.
Recommended Gear
A microfiber cloth keeps lens surfaces free of grit during swaps. View on Amazon
A hard lens case protects spare lenses from pocket wear and impact. View on Amazon
A small lens cleaning spray removes oils that can cause smearing after a swap. View on Amazon
FAQ
Do I need special tools to change DHB cycling glasses lenses?
Most models can be changed by hand, though a soft cloth and a clean workspace help a great deal. Check your frame’s manual, since some designs use small screws that need a tiny screwdriver.
Can I put a lens in backward?
Yes, and it is an easy mistake to make. Look for the orientation marks on the lens and the frame before seating it.
How do I know the lens is secure?
A secure lens sits flush with no gaps, does not bulge, and does not rattle when you tap the frame. If it moves at all, reseat it before riding.
Conclusion
Changing DHB cycling glasses lenses comes down to clean handling, correct orientation and a firm seating check. Match the lens to your typical light, store spares properly, and you will have a secure, clear view on every ride. If you are unsure about your frame model, consult the manufacturer or a qualified optician before making changes.

Write Your Review
No reviews yet. Be the first to share your experience!