This page contains Amazon affiliate links. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.

Choosing a bike phone mount comes down to how securely it grips your phone, whether it fits your handlebar, and if it allows camera use or easy one-hand locking. The mounts here all clamp to round handlebars and hold phones between about 4.7 and 7 inches, but they differ in locking mechanisms, vibration damping, and extra features.

We looked at seven handlebar mounts from Lamicall, LISEN, JOYROOM, CAW.CAR, and Pnitri. The details below come from each product’s Amazon listing, so the claims are what the brands say about their mounts. For a deeper dive into mount types and security, read our bike phone mount guide.

Every specification on this page comes from each product’s Amazon listing (item data from Amazon’s Creators API), checked on 29 October 2026. We have not used these products ourselves, so the picks are based on published specifications only.

If you’re deciding between a dedicated GPS computer and a phone mount, see our GPS bike computer vs phone mount comparison, and check our bike phone mount guide for more on types and security.

How we chose these

  • Phone compatibility: Check the mount’s supported phone width and thickness, especially if you use a case.
  • Handlebar fit: Measure your handlebar diameter; mounts have varying fit ranges, so check the maker’s specs.
  • Locking mechanism: A positive lock (switch, button, or double-layer) adds security on bumpy roads.
  • Camera and button access: Some mounts block the camera or side buttons; half-enclosure designs leave them free.

Locking and grip claims are the brands’ own; none of the listings give an independent measure of hold strength.

Comparison table

Product Phone size range Handlebar diameter Locking type Rotation Weight Camera friendly?
Lamicall (red switch) 4.7-6.8 in 0.59-1.57 in Red switch lock 360° 0.44 lb Not stated
LISEN 4.7-6.8 in 0.6-1.57 in Locking mechanism Not stated 0.22 lb Not stated
JOYROOM (auto lock) 4.7-7 in 0.7-1.34 in Auto lock + double lock 360° 0.6 lb Not stated
CAW.CAR Not stated 0.5-1.7 in Rubber sling 360° 0.4 lb Not stated
Lamicall (1s Lock) 4.7-7 in 0.59-1.57 in Safety lock 360° 0.4 lb Yes
Pnitri 4.7-7.2 in 0.59-1.18 in One-click lock 360° 0.44 lb Front camera free
JOYROOM (camera friendly) 4.7-7 in 15-31 mm Double-layer lock 360° Not stated Yes

All specifications are from each product’s Amazon listing. ‘Not stated’ means the listing does not give that detail.

3
JOYROOM Motorcycle Phone Mount, [1s Auto Lock][100mph Military Anti-Shake] Bike Phone Holder for Bicycle, [10s Quick Install] Handlebar Phone Mount, Compatible with iPhone, Samsung, All Cell Phone
Limited Time

JOYROOM Motorcycle Phone Mount

JOYROOM
View on Amazon
Pros & Cons

Pros

  • Auto-lock with double security
  • Durable ball joint
  • 360° rotation

Cons

  • Heavier at 0.6 lb
  • Handlebar range narrower (0.7-1.34 in)
  • Camera access not mentioned

1. Lamicall Bike Phone Holder Motorcycle Mount: for riders wanting a simple lock switch

Lamicall says this mount grips each corner of the phone tightly and uses a red switch on the back to lock the clip. Silicone pads provide shockproof protection, and the mount rotates 360 degrees. It fits handlebars from 0.59 to 1.57 inches and phones from 4.7 to 6.8 inches.

  • Silicone pads protect against scratches and vibration (Lamicall).
  • One-hand operation for installation (Lamicall).

Pros: Lock switch adds security; silicone pads dampen vibration; wide handlebar range
Cons: Phones with case up to 0.59 in (15mm) thick; camera access not mentioned; max phone size 6.8 inches

View on Amazon

2. LISEN Bike Phone Holder: for quick tool-free installation

LISEN claims an ultra-secure hold with all-around grip and an upgraded locking mechanism. The mount installs in seconds without tools, and full silicone wrap absorbs shocks. It fits phones 4.7 to 6.8 inches and handlebars 0.6 to 1.57 inches.

  • Built-in silicone design allows 5-second installation (LISEN).
  • Includes 12-month support (LISEN).

Pros: Lightweight at 0.22 lb; quick installation; thick phone case support (20mm)
Cons: Rotation not specified; locking mechanism details vague; camera access not mentioned

View on Amazon

3. JOYROOM Motorcycle Phone Mount: for auto-lock convenience

JOYROOM states that a single click auto-locks the phone, and a high-speed lock switch provides double security. The ball joint is made of military-grade material for durability, and the mount rotates 360 degrees. It fits phones 4.7 to 7 inches and handlebars 0.7 to 1.34 inches.

  • Tested to withstand 10,000+ lock button presses (JOYROOM).
  • Military-grade A+ material for ball joint (JOYROOM).

Pros: Auto-lock with double security; durable ball joint; 360° rotation
Cons: Heavier at 0.6 lb; handlebar range narrower (0.7-1.34 in); camera access not mentioned

View on Amazon

4. CAW.CAR Accessories Upgraded Bicycle & Motorcycle Phone Mount: for universal fit with rubber sling

CAW.CAR says the rubber sling reduces vibrations and holds the phone securely while keeping buttons and ports accessible. The mount fits handlebars from 0.5 to 1.7 inches and rotates 360 degrees. No tools are needed for installation.

  • Works with cases and Popsockets (CAW.CAR).
  • No tools required for installation (CAW.CAR).

Pros: Wide handlebar range (0.5-1.7 in); rubber sling absorbs shock; works with Popsockets
Cons: Phone size range not stated; no positive lock switch; weight 0.4 lb

View on Amazon

5. Lamicall Motorcycle Bike Phone Mount: for camera-friendly 1s lock

Lamicall highlights a half-enclosure design that leaves the camera unblocked, allowing photo and video recording. A safety lock secures the phone, and the handlebar clip adjusts without tools. It fits phones 4.7 to 7 inches and handlebars 0.59 to 1.57 inches.

  • Turn knob to adjust width, then lock safety lock (Lamicall).
  • All-around rubber pads protect phone from scratching (Lamicall).

Pros: Camera-friendly design; safety lock; 360° rotation; weight 0.4 lb
Cons: Handlebar range similar to others; phone thickness limit not stated

View on Amazon

6. Pnitri Bike Phone Holder Handlebar: for large phones with deep hook

Pnitri claims a one-click locking mechanism and enhanced ripple silicone padding for shock absorption. The mount has a 0.79-inch depth hook to hold large phones and rotates 360 degrees. It fits phones 4.7 to 7.2 inches and handlebars 0.59 to 1.18 inches.

  • 0.79-inch depth hook for thick phone cases (Pnitri).
  • Does not block facial recognition or volume keys (Pnitri).

Pros: Fits larger phones up to 7.2 in; deep hook for thick cases; camera-friendly
Cons: Handlebar range narrower (0.59-1.18 in); locking mechanism not detailed

View on Amazon

7. JOYROOM Motorcycle Bike Phone Holder Mount: for camera-friendly double-layer lock

JOYROOM says the double-layer locks and heavy-duty silicone pads prevent the phone from falling off on bumpy rides. The half-enclosure design does not block the camera or side buttons. It fits phones 4.7 to 7 inches and includes extra rubber gaskets for handlebar fit.

  • Extra 4 rubber gaskets for handlebar diameter adjustment (JOYROOM).
  • Supports one-hand operation, 1s to put on and take off (JOYROOM).

Pros: Camera-friendly; double-layer lock; includes extra gaskets
Cons: Weight not stated; phone size range up to 7 in

View on Amazon

Which one fits you

Your situation Look at Why
You use a thick phone case LISEN or Pnitri LISEN supports up to 20mm thickness; Pnitri has a 0.79-inch depth hook.
You want to record video while riding Lamicall (1s Lock) or JOYROOM (camera friendly) Both have half-enclosure designs that leave the camera unblocked.
You need a mount for a very thick handlebar CAW.CAR It fits handlebars up to 1.7 inches, the widest range here.
You prefer a one-click auto-lock JOYROOM (auto lock) The auto-lock button and double lock provide quick, secure mounting.

Practical tips

  • Measure your handlebar diameter before buying; mounts fit round bars of different sizes, so check the maker’s stated range.
  • If you ride on rough terrain, look for a mount with a positive lock switch or double-layer lock to prevent the phone from vibrating loose.
  • Consider whether you need camera access for navigation apps that use the camera or for recording rides; half-enclosure mounts leave the camera free.
  • Check the mount’s maximum phone thickness if you use a case; the Lamicall red switch model lists 0.59 inches (15mm) including the case, while LISEN lists 20mm.

FAQ

Do these mounts work with any phone?

Most fit phones between 4.7 and 7 inches, but thickness limits vary: LISEN lists up to 20mm and the Lamicall red switch model up to 0.59 inches (15mm) including the case. Check your phone and case against each listing.

Can I use these mounts on a motorcycle?

Yes, all the mounts listed are designed for bicycles and motorcycles with tubular handlebars, according to the brands. Ensure the handlebar diameter is within the mount’s range.

Will the mount block my phone’s camera?

The Lamicall (1s Lock) and JOYROOM (camera friendly) use a half-enclosure design that leaves the camera unblocked, and Pnitri says its holder keeps the front camera clear. The other listings do not mention camera access, so check the product photos.

How do I install a bike phone mount?

Most mounts clamp onto the handlebar without tools. LISEN claims a 5-second installation, while others use a screw or press-button clamp. Always tighten securely before riding.

Sources

Specifications from each product’s Amazon listing, checked 29 October 2026: Lamicall Bike Phone Holder Motorcycle Mount, LISEN Bike Phone Holder, JOYROOM Motorcycle Phone Mount, CAW.CAR Accessories Upgraded Bicycle & Motorcycle Phone Mount, Lamicall Motorcycle Bike Phone Mount, Pnitri Bike Phone Holder Handlebar, JOYROOM Motorcycle Bike Phone Holder Mount. Makers can change specifications; check the product page before you buy.