Updated November 2026

Bell F20 bike computer instructions boil down to four jobs: install the unit, set your wheel size, pair any sensors, and choose which data screens you want to see while riding. Once those are done, the computer should record speed, distance and time accurately. This guide walks through each step in the order that avoids the most frustration.

Install the Mount and Unit

Most Bell F20 setups use a handlebar mount that the computer clicks or slides into. Position the mount where you can read the screen without looking down far enough to affect your balance. Tighten the mount snugly, but not so hard that you crack the housing or scratch the bar tape.

Shopping for one? See our guide: 6 Best Bike Computers for MTB Picks: Buyer's Guide for Trail Riders (2026).

Check that the unit seats fully and locks in place before you ride. A computer that rattles loose on rough pavement can drop off or spin, which throws off readings and can damage the screen.

Set Wheel Size and Units

Accurate distance depends on the correct wheel circumference. Enter the wheel size your bike actually uses, not the size printed on the tire sidewall alone. Many owners find the sidewall number is a rough guide, so measure if you are unsure:

  1. Inflate the tire to your normal riding pressure.
  2. Mark the spot where the tire meets the ground.
  3. Roll the bike forward exactly one full wheel revolution in a straight line.
  4. Measure the distance between the two marks in millimeters.

Enter that value in the wheel size or circumference setting. Then choose your units, miles or kilometers, in the main settings menu.

Pair Sensors and Choose Data Screens

If you use a speed sensor, cadence sensor or heart rate strap, put the computer into its sensor search mode and spin the wheel or pedal, or put on the strap, to trigger pairing. Keep the sensor within about a meter of the computer during pairing, and keep other bike computers and phones away from the process, since nearby devices can cause the wrong sensor to connect.

Next, set up your data screens. Most users keep one screen for speed, distance and time, and a second for cadence or heart rate. Limit each screen to the fields you check while riding. Crowded screens are harder to read at a glance.

Test Before You Head Out

Spin the wheel by hand while the computer is on and confirm the speed reads as expected. Start a short test ride around the block and check that distance and time increase as you go.

Common Mistakes

  • Entering the tire size from the sidewall without measuring, which often leads to distance errors.
  • Pairing sensors with other devices nearby still running, causing the wrong unit to connect.
  • Mounting the computer where cables or brake lines block the screen.
  • Skipping a test ride, so problems only show up mid-workout.
  • Forgetting to recalibrate after changing wheels or tire size.

A stable mount makes a noticeable difference in whether the computer stays readable on rough roads. Look for a bracket compatible with your handlebar diameter. View on Amazon

A spare speed or cadence sensor is useful if you move the computer between bikes, since each bike usually needs its own pairing. View on Amazon

A small microfiber cloth keeps the screen clear of grime, which otherwise can make the display hard to read in bright sunlight. View on Amazon

For a more detailed walkthrough of the printed guide and where to find the official version, see Bell Bike Computer Manual: Where to Find It and How to Set It Up. If you are also weighing other models, What's the Best Bike Computer? 6 Top Picks Compared (2026) gives useful context on how options differ.

FAQ

Why does my Bell F20 show the wrong distance?

The most common cause is an incorrect wheel size or circumference setting. Measure your actual rolling circumference and re-enter the value.

How do I know if my sensor is paired?

Look for the sensor icon on the main screen after pairing. If it does not appear, repeat the search mode steps with the sensor close to the computer.

Should I check the setup every time I ride?

A quick check of wheel size, units and sensor status before each ride is worth the few seconds it takes. It catches problems early.

Conclusion

Installing the unit, setting an accurate wheel size, pairing sensors and testing on a short ride covers most of what the Bell F20 needs. Work through these steps in order and recheck wheel size whenever you change tires. Accurate data starts with a few minutes of careful setup.

Caleb Morgan

About Caleb Morgan

Caleb Morgan is part of our editorial team and reviews and edits our cycling apparel & tech guides, checking product details against manufacturer specifications and owner feedback.