Updated November 2026
A Bell 100 bike computer is a simple, no-frills cycling computer that tracks speed, distance and time without asking you to learn a complicated interface. This guide walks you through installing the unit, setting the wheel size and basic options, and deciding whether the bell 100 bike computer fits the way you ride. Expect about 20 minutes for the full setup if you have the wheel measurements handy.
What You Need Before You Start
Gather everything first so you are not stopping halfway through the installation. Most owners find the process smooth once the tools are on hand.
Shopping for one? See our guide: 6 Best Bike Computers for MTB Picks: Buyer's Guide for Trail Riders (2026).
- The computer head unit and its mounting bracket
- The speed sensor and magnet (usually included in the box)
- A small Phillips screwdriver or the tool supplied with the kit
- A cable tie or two for tidy routing
- A tape measure or your bike’s wheel size chart
Installing the Bell 100 Bike Computer Hardware
Mount the head unit on the handlebar or stem, positioned where you can read it at a glance without dropping your eyes far from the road. Keep it clear of brake levers and cables so it does not interfere with your hand position.
- Attach the bracket to the bar using the rubber strap or clamp, then snap the head unit into place.
- Slide the speed magnet onto a spoke of the front wheel, roughly 2 to 3 mm from the spoke’s end, so it passes the sensor on every rotation.
- Mount the sensor on the fork leg, aligning it so the magnet passes within the gap the manufacturer specifies, typically a few millimeters.
- Route the cable along the fork and frame, securing it with cable ties and leaving enough slack to turn the bars fully in both directions.
Setting Wheel Size and Basic Options
Accurate distance depends almost entirely on the wheel circumference you enter. Measure your tire from the ground to the top of the wheel, or use the circumference listed for your tire size. Enter the value in the unit’s setup menu, and then check the displayed distance against a short known route if you can. If you want more background, see Bike Bells and Mirrors: Signaling and Seeing Traffic.
Choosing Units and Display Fields
Set miles or kilometers, then select which data fields you want on the main screen. Keep the display simple: speed, trip distance and elapsed time cover most everyday riding needs.
Deciding Whether the Bell 100 Fits Your Riding
A basic computer suits commuters and casual riders who want speed and distance without navigation or app syncing. If you plan to follow routes or review detailed ride data, a GPS model with smartphone connectivity will serve you better. The table below summarizes the trade-offs.
| Need | Bell 100 Style Unit | GPS or App-Connected Unit |
|---|---|---|
| Speed, distance, time | Yes | Yes |
| Route navigation | No | Usually yes |
| Ride history and analysis | Limited | Detailed |
| Battery and setup simplicity | Simple | More involved |
If you are still weighing options, a comparison of Wireless vs Wired Bike Computer: Which Is Better for Your Riding? (2026) explains the connection trade-offs that affect installation.
Common Mistakes and Tips
- Entering the wrong wheel size, which throws off every distance reading.
- Placing the magnet too far from the sensor so it skips counts.
- Tightening the mount so hard that the bracket cracks on rough roads.
- Forgetting to reset the trip counter before a new ride.
- Leaving cables loose enough to catch on the front wheel.
Recommended Gear
A few inexpensive accessories make installation cleaner and riding more comfortable.
- Spare cable ties help keep the sensor wire away from moving parts. View on Amazon
- A small set of Phillips screwdrivers covers most bracket and sensor fasteners. View on Amazon
- A stem or bar mount adapter can help if the supplied bracket does not fit your handlebar diameter. View on Amazon
FAQ
Do I need a phone to use a Bell 100 bike computer?
No. Basic units like this run independently and show speed, distance and time on their own display without any app pairing.
Why does my distance reading seem off?
The most common cause is an incorrect wheel size setting. Re-measure your tire and compare the displayed distance against a known route.
Can I move the computer to another bike?
Yes. Remove the head unit and bracket, then re-mount the sensor and magnet on the new bike and update the wheel size if the tires differ.
Conclusion
With the hardware mounted correctly and the wheel size entered accurately, a Bell 100 bike computer gives you reliable speed and distance with very little fuss. Check your readings on a known route once or twice to confirm the setup. If you later need navigation or detailed ride analysis, you can compare other options before upgrading.

Write Your Review
No reviews yet. Be the first to share your experience!