Updated November 2026
A giant e bike computer reset clears stuck screens, odd readings and failed pairing without touching your ride data in most cases. Start with a soft restart, which takes under a minute. If that fails, move to a factory reset, then re-pair your sensors and confirm the settings before your next ride. Exact button steps vary by model, so check your owner’s manual for the final details.
Start With a Soft Restart
A soft restart cycles the power without erasing your settings. It fixes most frozen screens and lost sensor connections. Turn the display off using the power button, wait about 30 seconds, then turn it back on. Give it a moment to reacquire GPS and reconnect to your sensors.
Shopping for one? See our guide: 6 Best Bike Computers for MTB Picks: Buyer's Guide for Trail Riders (2026).
Perform a Factory Reset When Problems Persist
If the display still freezes, shows wrong values or refuses to pair, a factory reset is the next step. It returns the computer to its original configuration, so you will need to set your units, profile and ride screens again. Before you begin, confirm that your firmware is current through the Giant mobile app, since outdated software causes many of the same symptoms.
- Charge the computer to at least half before starting.
- Open the settings menu and look for the reset or restore option.
- Confirm the prompt and wait for the unit to restart fully.
- Reboot once more if the screen does not come back cleanly.
Re-Pair Sensors and Check Your Settings
A reset almost always breaks sensor pairings. Put each sensor, such as a cadence or speed sensor, into pairing mode, then search for it from the computer’s sensor menu. Spin the wheel or pedal once to wake the sensor if it does not appear right away. Once everything is connected, check wheel size, units and power-related settings. Wrong wheel size is one of the most common causes of inaccurate distance readings after a reset.
Reset Checklist
| Step | What to Check |
|---|---|
| Firmware | Updated through the Giant app |
| Battery | At least half charged |
| Sensors | Re-paired and showing live data |
| Wheel size | Matches your actual tire |
| Ride screens | Reconfigured to your preference |
Common Mistakes
- Skipping the firmware update, then resetting again and getting the same error.
- Pairing sensors while they are still bonded to another device, such as a phone or a previous head unit.
- Forgetting that a factory reset also clears saved profiles and ride screens.
- Assuming a reset will fix a physical sensor fault. Batteries in sensors often cause dropouts.
- Resetting before a ride without testing the sensors at home first.
Recommended Gear
A spare set of sensor batteries makes troubleshooting far easier, since a weak battery mimics a pairing fault. View on Amazon
A small phone holder or mount lets you keep the Giant app open while you re-pair, which saves switching between screens. View on Amazon
FAQ
Will a giant e bike computer reset delete my ride history?
A soft restart keeps all saved rides. A factory reset may clear locally stored settings and profiles, so sync recent rides to the Giant app first when you can.
Why does my computer still show the wrong speed after a reset?
The wheel size setting is the most likely cause. Enter the correct tire size and confirm the speed sensor is paired and transmitting.
When should I contact a professional?
If the computer will not power on after charging, or resets fail repeatedly, contact Giant support or an authorized dealer for diagnosis.
Conclusion
Start with a soft restart, then move to a factory reset only if the problem continues. Update your firmware, re-pair your sensors and verify wheel size before riding. Most reset issues clear up with these steps, and your owner’s manual covers any model-specific details.
Related reading
- iPhone as Bike Computer vs Dedicated Unit: Which Should You Choose?
- Wireless vs Wired Bike Computer: Which Is Better for Your Riding? (2026)
- Wireless Bike Computer Installation: A Step-by-Step Guide (2026)
- What's the Best Bike Computer? 6 Top Picks Compared (2026)
- West Bike Computer Manual: Where to Find and How to Use Yours
- Wahoo Versus Garmin Bike Computer (2026): Which Is Better for Your Riding?

Write Your Review
No reviews yet. Be the first to share your experience!